Table of Contents
Advertisement
C
A
HANGING
DDRESS
S
ETTINGS
In the Addressing tab, you can change the following address information for the
Gateway—IP address information, DNS information and the Ethernet port speed
and duplex.
Procedure
In the Administrator interface, on the sidebar, click Board.
1
Click the Addressing tab.
2
To change an IP address setting, do any of the following steps:
3
In the IP Address field, type the IP address you want to assign to the
Gateway.
In the Router IP field, type the IP address of the router you want the
Gateway to use.
In the Subnet Mask field, type the subnet mask you want the
Gateway to use.
In the DNS Server IP field, type the IP address of the DNS server that
4
you want the Gateway to use.
In the Port settings field, choose the Ethernet port and duplex speed
5
value you want to set.
6
On the toolbar, click Upload.
Related Topics
Viewing Address Settings
Viewing Address Settings
on page 68
Configuring the SCOPIA Gateway
69
Advertisement
Table of Contents
