Table of Contents
Advertisement
Configuring Gateway Settings
C
ONFIGURING
O
C
UTGOING
ALL
D
ELIMITERS
94
SCOPIA 400/1000 Gateway User Guide
10
In the IVR address field, enter the IP address for the IVR system on the
external device.
In the Port field, enter the port number for the IVR system on the
11
external device. The default port setting is 1620.
In the Delimiters section of the Settings tab, you can configure outgoing call
delimiter characters.
Procedure
In the Gateway interface, on the sidebar, click Gateway (if it is not
1
already selected).
2
Click the Settings tab.
3
Click the Delimiters button.
In the Second number delimiter field, enter the character used as a
4
second number delimiter for dialing more than one ISDN number in
setting up a 2B call. You can use the pound sign (#), asterisk (*) or
comma (,) as a delimiter in outgoing calls only. Not available in
Gateway S40 SP.
In the TCS4 extension delimiter field, enter the character used as an
5
extension number for TCS4 outgoing IP-to-ISDN call routing. You can
use the pound sign (#), asterisk (*) or comma (,) as a delimiter in
outgoing calls only. This setting does not apply for voice calls.
Since the comma cannot be used in the Party number field of the MCU
Note
Conference Control interface, we recommend that you do not use the comma
as a second number delimiter or as a TCS4 extension delimiter.
Advertisement
Table of Contents
