Table of Contents
Advertisement
4
Select the type of IVR functionality:
Use internal IVR—Enables the Gateway IVR functionality so that
incoming calls can route to an endpoint on the IP network. Follow
step 6
to
step
The IVR must be enabled for the port that supports IVR.
Note
Use external IVR—Select to set the IP address and port number for
an IVR system in another device. Follow
Select the IVR registers with gatekeeper check box to enable the
5
internal IVR to register with the gatekeeper.
In the IVR registration name field, type the IVR registration alias used
6
with the gatekeeper.
Deselect the Transfer to Operator when '*' pressed during IVR
7
check box to ignore the IVR operator digit (which is currently "*") and
make it part of the dial string.
8
In the IVR Operator Extension field, set the E.164 number of an
endpoint that is registered with the gatekeeper to function as an IVR
operator for incoming calls. To do this, type the same number for the
IVR operator extension for each of the IP terminals that you want to
include in the single number access. You can also use an ISDN endpoint
as the IVR operator extension. To do this, define the IVR operator
extension using the format <Gateway service><ISDN number>.
Select or deselect the Return to main IVR menu if IP extension # is
9
unreachable check box to enable or disable an IVR retry.
Note
This check box is selected by default except after a software upgrade,
in which case it is deselected.
Regardless of whether or not this check box is selected, if a call cannot be
connected, the user is played an IVR message that states the reason why the
call cannot be connected, followed by instructions as to what to do next.
9.
Configuring the SCOPIA Gateway
Configuring Gateway Settings
step 10
and
step
11.
93
Advertisement
Table of Contents
