Table of Contents
Advertisement
A
CCESSING THE
G
ATEWAY
A
DMINISTRATOR
I
NTERFACE
The Gateway Administrator is a web interface that allows you to view and
configure the Gateway hardware and application parameters. You can use the
Gateway interface to:
Set administrative parameters to define access to the Gateway
Set Gateway application parameters that specify how the Gateway
processes incoming and outgoing calls
Set chassis operating parameters for SCOPIA Gateway modules
installed in the top slot of a SCOPIA 400 chassis
Before You Begin
The following requirements are necessary to access the Gateway Administrator
web interface:
A Java-compliant browser. Microsoft Internet Explorer version 5.5 or
later is recommended.
The Gateway IP address or a web link to the Gateway.
Administrator level-access
The required user name and password.
For first-time installation, you must assign an IP address to the Gateway
Note
using a serial port connection before you can access the web interface. For more
information, see
Setting the IP Address
Procedure
Launch your browser and type the IP address or the name of
1
the Gateway.
For example, http://125.221.23.44 or board_name.
The Gateway login page appears.
Accessing the Gateway Administrator Interface
on page 35.
Installing the SCOPIA Gateway
57
Advertisement
Table of Contents
