Table of Contents
Advertisement
C
ONFIGURING
N
S
ETWORK
PECIFIC
F
S
ACILITY
ETTINGS
6
In the Description field, enter or edit the description of the ISDN
information element. If you set this field to Default, it cannot be edited
after you create the element.
In the Numbering Plan Identification (NPI) field, choose an NPI code
7
for the ISDN information element.
In the Type of Number (TON) field, choose a TON code for the ISDN
8
information element.
In the Maximum digits send field, enter the number of digits (up to a
9
maximum of 32) allowed for outbound dialing.
10
In the DN Manipulation field, you can configure the stripping of the
ISDN information prefix number from the outbound dialed number.
The options in this field vary according to the options set in the Prefix
and Type of Number (TON) fields.
variations
Table 3-26
DN Manipulation Option Variations
Prefix Field
Default
Default
Any except Default
You are now ready to configure your required Network Specific Facility
settings (see
Configuring Network Specific Facility
This section describes how to complete the procedure that you began in
or Editing ISDN Information
You can choose one of the pre-configured settings or choose None to not
configure any NSF information elements.
settings.
Table 3-26
Type of Number (TON)
Field
Local
Any except Local
Any
Elements.
Table 3-27
Configuring the SCOPIA Gateway
Configuring Port Settings
details the possible
DN Manipulation Options
None, Append Local Area
Code
None
None, Strip Prefix
Settings).
Adding
lists the pre-configured
143
Advertisement
Table of Contents
