Table of Contents
Advertisement
Viewing General Information About the Gateway
S
T
ETTING THE
IME
D
AND
ATE ON THE
G
ATEWAY
66
SCOPIA 400/1000 Gateway User Guide
You use the Basics tab to choose how your Gateway tracks the date and time.
Procedure
On the sidebar, click Board.
1
2
Click the Basics tab.
3
Locate the Date/Time field and click Change.
The Change Time dialog box appears. The date and time the Gateway
reports appear in the Set time to field.
In the Change field, select the unit of time that you want to change.
4
There is no unit to change AM and PM. This designation rolls
Note
automatically when the hour rolls past 12 backward or forward. Similarly,
seconds roll minutes, minutes roll hours, hours roll days, and days roll
months.
In the Set time to field, choose the up or down arrow to change that unit.
5
The unit you choose changes in the direction you choose: higher (up) or
lower (down).
Repeat
step 4
6
On the toolbar, click Upload.
7
and
5
for as many units as you want to change.
Advertisement
Table of Contents
