Table of Contents
Advertisement
Viewing Call Information
150
SCOPIA 400/1000 Gateway User Guide
Table 3-28
Call Details Window Fields
Field
Description
Start
Displays the time at which the call began.
Duration
Displays the length of time that the call has been in progress.
Bandwidth (Kbps)
Displays the total bandwidth (in Kbps) used for this call on both
sides.
Source
Source
Indicates whether the source endpoint of the call is located on an
ISDN (or serial) or IP network.
Number
Displays the alias that identifies the source endpoint of the call.
B channels (not
Displays the B channels currently in use for this call.
available in
Gateway S40 SP)
Resync B channels
In mid-call, you can click this button to resynchronize B channels
(not available in
in cases of poor call quality.
Gateway S40 SP)
Use this option with extreme caution. Resynchronizing B channels
can cause a call to disconnect.
Encryption
"Encryption: AES 128" displays when the call leg is encrypted.
Audio
Displays the audio transcoding protocol and the bandwidth of the
voice calls in both directions between the source endpoint and the
Gateway.
Video
Displays the video transcoding protocol, the frame format, and the
bandwidth of the video calls in both directions between the source
endpoint and the Gateway.
Note The Video 2 stream is active when dual video streams for a
single call are in use.
Data
Displays the bandwidth of the data calls in both directions between
the source endpoint and the Gateway.
Advertisement
Table of Contents
