RADVision SCOPIA 400 User Manual page 112

Configuring Gateway Settings
G E
ATEWAY VENT
T
YPES
102 SCOPIA 400/1000 Gateway User Guide
Table 3-9 lists proprietary
Gateway, as detailed in the RvTrapEventType textual convention.
Table 3-10 lists SNMP trap event types for the Serial Gateway, as detailed in the
RvTrapEventType textual convention.
In certain cases, after a problem that caused a trap to be sent has been
Note
solved, an identical clearing trap is sent to indicate that the problem has been
solved. The severity of the clearing trap is always 0. The trap OID and the
RvTrapEventType value of the clearing trap are identical to those of the original
trap sent when the problem occurred. The sending of a clearing trap is indicated
by a severity level of "Clear."
Table 3-9 PRI Gateway SNMP Trap Event Types
Event Type Trap is sent when:
Abnormal A call has disconnected for a reason other
disconnect than normal, busy or no answer.
Authentication A login attempt to the web interface fails
failure (specific) due to incorrect user name or password.
Bad video Corrupt or empty video packets are present
in the Gateway. Includes the ID number of
the call during which the event occurs.
Call from The Gateway has rejected an incoming IP
non-peer H.323 call because the source does not appear in
entity rejected the peer list.
Call from peer A call from a peer has been rejected because
rejected due to the Gateway does not have enough
capacity resources available.
Call to peer failed A call to a peer has failed because the peer
- peer list empty list is empty.
Call to peer A call to a peer has been rejected and the
rejected - trying Gateway is searching for an alternate peer.
alternate
SNMP trap event types for the PRI
RADVISION
State Severity
Warning
Warning
TRUE Minor
FALSE Clear
Warning
Warning
Major
Warning