Uploading A Message To A Device - RADVision SCOPIA 400 User Manual

Uploading a Message to a Device

U
PLOADING A
M
ESSAGE TO A
D
EVICE
184 SCOPIA 400/1000 Gateway User Guide
This section describes how to upload audio messages from the Audio Message
Utility to a target device.
Procedure
From the Actions menu, select Upload Messages To Target.
1
The Upload dialog box appears.
2 In the General Information section, enter the IP address of the target
device.
In the Login Information section, enter the user name and password of
3
the target device, as configured in the device network configuration
settings.
(Optional) Modify the read and write community settings for the target
4
device as follows:
Click Customize SNMP Settings.
The Customize SNMP Settings dialog box displays.
Enter the required read community and write community values and
click OK.
The default read and write community settings are RVGET2 and
RVSET2 respectively.
Click Upload Messages.
5
The Upload in progress window appears, and the message files are
uploaded and burned onto the target device.