D
G
ELETING
ATEWAY
I
U
NTERFACE
SERS
V
LED
IEWING
I
NFORMATION
3
Select an existing user and click Edit.
The Edit User dialog box appears.
In the User name field, edit the user login name.
4
In the Access Level field, choose one of the following access levels:
5
Administrator, Operator or Read only.
In the Password field, edit the password that the user uses to login to the
6
Gateway interface.
7
In the Confirm Password field, re-enter the password.
8
Click Upload.
In the Users tab of the Board section of the Gateway interface, you can delete
Gateway interface users.
Procedure
In the Gateway interface, on the sidebar, click Board.
1
Click the Users tab.
2
Select a user and click Delete.
3
In the LED Monitoring tab in the Board interface, you can monitor the status of
all the Gateway front and rear panel LED indicators. The LEDs are displayed in
diagrams reproducing the layout of the Gateway front and rear panels.
Procedure
1
In the Gateway interface, on the sidebar, click Board.
2
Click the LED Monitoring tab.
3
Place the mouse cursor over the required LED in the LED Monitoring
tab to view a description of that LED.
Viewing LED Information
Configuring the SCOPIA Gateway
63