Table of Contents
Advertisement
About Dialing In to the IP Network via the Gateway
A
D
BOUT
IALING
I
NDIRECTLY THROUGH AN
O
PERATOR
164
SCOPIA 400/1000 Gateway User Guide
If you do not dial the number of a destination endpoint when requested to do so
by the IVR, the IVR automatically passes you to an operator. You can define any
endpoint on the IP network as the IVR operator (see
on page 92 for more information).
When IVR is enabled, you are answered by a recorded message prompting you
to enter the destination endpoint phone number. If you do not know the
destination endpoint number, the IVR routes the call from the Gateway using
ISDN to the IP network endpoint that is defined as the IVR operator.
Dialing Example 11: Dialing to an IP network endpoint through an operator
The number string 5645000 <wait for the IVR to respond>* is a call to an IP
network through an IVR operator. This number string consists of:
5645000—The Gateway phone number.
*—This character is optional.
Configuring IVR Settings
Advertisement
Table of Contents
