About The Gateway Administrator Interface - RADVision SCOPIA 400 User Manual

About the Gateway Administrator Interface

A
BOUT THE
G
ATEWAY
A
DMINISTRATOR
I
NTERFACE
80 SCOPIA 400/1000 Gateway User Guide
In the Gateway Administrator interface, you can view Gateway resource
information, define the Gateway mode of operation, configure and edit Gateway
services, configure physical line settings, monitor and disconnect calls, view
reported alert events, and view debugging details.
appear in the Gateway Administrator interface.
Note There may be slight variations between the configuration options described
in this section and the options appearing in the Gateway you are working with.
Table 3-4 Gateway Administrator Interface Tabs
Tab Name Description
Status Displays Gateway resource usage information, number of calls currently
in progress, and servicing gatekeeper details.
Settings Defines the mode of Gateway operation.
Services Defines services that the Gateway provides.
Port Defines physical line settings for that particular PRI or serial port.
Calls Displays details on current calls and disconnect calls.
Event Log Displays reported alert events.
Statistics Displays specific system information such as call traces and debugging
details.
Maintenance Provides access to maintenance mode, in which you can prevent the
Gateway from accepting new calls, and perform software upgrades and
other maintenance work.
Figure 3-1 and Table 3-5
Administrator interface.
display and list the elements in the Gateway
Table 3-4 explains the tabs that