Table of Contents
Advertisement
Configuring Gateway Settings
C
ONFIGURING THE
G
ATEWAY TO
R
W
EGISTER
ITH A
G
ATEKEEPER
86
SCOPIA 400/1000 Gateway User Guide
In the IP Connectivity section of the Settings tab, you can configure the Gateway
to register with a gatekeeper.
Procedure
In the Gateway interface, on the sidebar, click Gateway (if not already
1
selected).
2
Click the Settings tab.
Click IP Connectivity.
3
In the IP connectivity mode field, choose Using gatekeeper.
4
Make one of the following selections:
5
Select the Gatekeeper auto discover and register option for the
Gateway to automatically search for and attempt to register to a
gatekeeper.
Select the Specify Gatekeeper address option to specify the
gatekeeper to which the Gateway registers.
6
In the Gatekeeper address field, do one of the following:
Enter the IP address of the gatekeeper to which the Gateway
registers.
—or—
Click Browse.
The Discovered Gatekeepers dialog box appears, displaying all
gatekeepers located on the same network segment as the Gateway.
Select a discovered gatekeeper.
Click OK.
In the Gatekeeper port field, enter the port number of the gatekeeper.
7
The default setting is 1719.
Select the Registration refresh every n seconds check box to set the
8
Time To Live interval (in seconds) that determines how often the
Gateway sends a "keep alive" message to the gatekeeper to ensure that
the Gateway registration is listed with the gatekeeper and does not
expire. Enter a value in seconds in the field.
Advertisement
Table of Contents
