Table of Contents
Advertisement
Configuring Security
C
ONFIGURING
S
ECURITY
76
SCOPIA 400/1000 Gateway User Guide
4
Enter the certificate name.
–or–
Click Browse to allocate the certificate to import.
The Choose File dialog box displays. Double-click the certificate that
you want to import.
Enter the same password that you used in the export certificate.
5
Click Import to import and install the new certificate.
6
You can configure the access that external programs have to the Gateway. These
external programs include Telnet, Simple Network Management Protocol
(SNMP), File Transfer Protocol (FTP), and ICMP (Internet Control Message
Protocol, or ping).
Procedure
In the Gateway interface, on the sidebar, click Board.
1
Click the Security tab.
2
From the Security mode field, choose the access level you want the
3
Gateway to support:
Standard—Enables SNMP, Telnet, FTP, and ICMP to access the
Gateway.
High (no Telnet or Ftp)—Enables access to the Gateway only
through SNMP and ICMP.
Maximum (no Telnet, ftp, SNMP and ICMP)—Disallows
external programs to access the Gateway.
In the SNMP Read community and Write community fields, enter
4
default strings used to enable SNMP communication between the
Gateway and a external application.
On the toolbar, click Upload.
5
Advertisement
Table of Contents
