Table of Contents
Advertisement
Launching the Utility
L
AUNCHING THE
U
TILITY
U
PGRADING
S
OFTWARE
190
SCOPIA 400/1000 Gateway User Guide
This section describes how to install and launch the
Upgrade Utility.
Procedure
Download the UpgradeUtility.exe file from the
1
Utilities and Documentation CD-ROM.
Double click the UpgradeUtility.exe file to run the Software
2
Upgrade Utility.
The upgrade files are extracted and the Upgrade Utility dialog
box appears.
This section describes how to use the Software Upgrade Utility to upgrade
software installed on
RADVISION
Procedure
In the General Information section of the Upgrade Utility
1
dialog box, enter the IP address of the device you want to
upgrade.
In the Login Information section, enter the administrator user
2
name and password for the target device, as configured in the
device network configuration settings.
3
(Optional) Modify the read and write community settings for
the target device as follows:
Click Customize SNMP Settings.
The Customize SNMP Settings dialog box displays.
Enter the required read community and write
community values.
The default read and write community settings are RVGET2
and RVSET2 respectively.
We recommend that you modify the default settings for security
Note
purposes.
RADVISION
RADVISION
devices.
RADVISION
Software
Advertisement
Table of Contents
