Table of Contents
Advertisement
I
MPORTING
C
ONFIGURATION
F
ILES
You can import the settings of a saved Gateway unit configuration file from a
storage device on your network. You can use the saved configuration file to
restore the settings to the current Gateway unit or to configure another Gateway
unit.
Procedure
In the Gateway interface, on the sidebar, click Gateway.
1
2
On the toolbar, click Import.
The Import a Configuration File page appears.
Click Browse.
3
The Choose file dialog box appears.
Navigate to and select the configuration file you want to import.
4
The file must have an .ini extension.
Note
5
Click Open.
The file path appears in the File Name field.
Click Import.
6
The file appears in the Gateway category window, and the Upload button
is active.
You can open and change settings in any of the Gateway category
Note
options without losing the original settings in the configuration file. However,
you must click Upload on the toolbar to retain these setting before selecting
another category.
Click Upload to save the settings in configuration memory.
7
Uploading the file resets the device.
Note
Importing Configuration Files
Configuring the SCOPIA Gateway
155
Advertisement
Table of Contents
