Setting The Gateway Location; Resetting Default Board Basic Settings - RADVision SCOPIA 400 User Manual

S
ETTING THE
G L
ATEWAY OCATION
R D
ESETTING EFAULT
B B
OARD ASIC
S
ETTINGS
You can install the Gateway anywhere on your network including at a remote
site. On the Basics tab, you can describe the current location of the Gateway.
Procedure
On the sidebar, click Board.
1
Click the Basics tab.
2
3 In the Location field, enter the location information about the Gateway
that you want to display.
The field displays up to 23 characters.
On the toolbar, click Upload to save to configuration memory.
4
In the Basics tab, you can restore board basic settings to factory defaults.
Procedure
On the sidebar, click Board.
1
Click the Basics tab.
2
Select the Reset to default settings check box.
3
Viewing General Information About the Gateway
Configuring the SCOPIA Gateway 67