RADVision SCOPIA 400 User Manual page 161

Table 3-28 Call Details Window Fields (continued)
Field Description
Gateway
Transcoded Indicates that a call is transcoded.
Destination
Destination Indicates whether the destination endpoint of the call is located on
an ISDN (or serial) or IP network.
Number Displays the alias that identifies the destination endpoint of the
call.
Name Displays the name that identifies the destination endpoint of the
call.
IP Displays the IP address of the destination endpoint of the call.
Packet Loss (%) Displays the rate of packet loss in communication from the IP side
of the call to the Gateway, regardless of whether the source
endpoint is located on an ISDN (or serial) or IP network.
Encryption "Encryption: AES 128" displays when the call leg is encrypted.
Audio Displays the audio transcoding protocol and the bandwidth of the
voice calls in both directions between the Gateway and the
destination endpoint.
Video Displays the video transcoding protocol, the frame format, and the
bandwidth of the video calls in both directions between the
Gateway and the destination endpoint.
Note The Video 2 stream is active when dual video streams for a
single call are in use.
Data Displays the bandwidth of the data calls in both directions between
the Gateway and the destination endpoint.
Viewing Call Information
Configuring the SCOPIA Gateway 151