Table of Contents
Advertisement
Introduction
I
NTRODUCTION
A
G
BOUT
ATEWAY
C
R
ALL
OUTING
178
SCOPIA 400/1000 Gateway User Guide
The
Audio Message Utility is an interactive GUI that enables you to
RADVISION
record and replace messages and upload new messages to the call routing
mechanisms in
RADVISION
Default built-in messages are in English. The
allows you to record new messages in a different language or with different
content to suit your requirements. The
enables you to replace and upload new messages to the target
device.
There are two ways of using the
standard utility functions enable you to play, record or replace messages. The
Express Setup guides you through the recording, replacing and upload procedure
for each message.
Before You Begin
Before you can record, play and upload messages to the target
device, you must
Save recorded messages as WAV files.
Know the IP address of the target device.
The
Audio Message Utility provides audio messages for the call
RADVISION
routing mechanism in
initiates a series of voice messages that allow you to make choices and respond
via the keypad through dial tones (DTMF).
The routing mechanism enables you to dial through the
an IP network-based H.323/SIP/RTSP terminal when you do not know the
extension number of the destination terminal.
devices.
RADVISION
RADVISION
Gateways. The call routing mechanism
RADVISION
Audio Message Utility
RADVISION
Audio Message Utility also
RADVISION
Audio Message Utility. The
RADVISION
RADVISION
Gateway to
Advertisement
Table of Contents
