About Gateway Features - RADVision SCOPIA 400 User Manual

Version 5.6
Hide thumbs Also See for SCOPIA 400:
Table of Contents

Advertisement

About Gateway Features

A
G
BOUT
ATEWAY
F
EATURES
Table 1-1
Gateway Feature Summary
Feature
Interoperability
Web-based management
SNMP management
Diagnostics
Network load balancing
T.120 data collaboration
Quality of service (QoS)
Dial plan
2
SCOPIA 400/1000 Gateway User Guide
Table 1-1
lists the major features of the SCOPIA Gateway.
Description
The Gateway provides a high degree of interoperability with other H.323 compliant
gateways, gatekeepers, terminals, proxy, and Multipoint Control Unit (MCU) products by
being based on the H.320 standard and H.323 protocol stack.
The Gateway features the Gateway interface. This is a web interface used to configure and
monitor the Gateway. You can view and modify all aspects of the Gateway configuration
from a remote location using a Java-enabled web browser.
The Gateway features Simple Network Management Protocol (SNMP) management that
supports all aspects of monitoring, diagnostics, configuration, and trapping.
The Gateway features front and rear panel LED indicators that display status for the unit.
You can also access remote diagnostics of the unit through the Gateway interface, Telnet,
SNMP, or a serial port.
The Gateway supports load balancing on the network by communicating with a gatekeeper
through H.323 RAI (Resource Available Indication)/RAC (Resource Available
Confirmation) messages.
The Gateway supports data transfers in calls between ISDN and IP by using high speed
T.120 in HMLP and VarMLP formats.
The Gateway features configurable coding of media packets to achieve QoS routing priority
on the Internet Protocol (IP) network. The Type of Service (ToS) bits of the IP datagram
header can be configured for priority level.
The Gateway supports a simplified dial plan for outbound dialing using a single universal
prefix. Using the dial plan, the Gateway automatically detects the capabilities received in the
Setup message from the IP endpoint and sets the same bit rate for the ISDN (or serial
interface) side of the call.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scopia 1000

Table of Contents