RADVision SCOPIA 400 User Manual page 114

Configuring Gateway Settings
104 SCOPIA 400/1000 Gateway User Guide
Table 3-9 PRI Gateway SNMP Trap Event Types (continued)
Event Type Trap is sent when:
Incompatible sw An attempt to burn a version of the Gateway
version install software onto incompatible hardware
occurs.
Loss of Ethernet The network returns after going down.
Indicates the time at which the network was
restored.
Loss of ISDN A state change occurs for each enabled
ISDN line.
Max resource A call could not be established because of a
meter lack of one of the following resources—
CPU, audio transcoder, DTMF detector or
T.120 resources.
Network problem A problem occurs on the network.
Power-down The Gateway is shutting down.
Power-up The Gateway has started to operate.
RAI status A change in RAI status occurs.
Snmp request An SNMP request uses community values
with invalid that do not match those of the Gateway.
community
Snmp write An SNMP write request is sent to the
request Gateway.
User account A user account is disabled.
locked
User logged in A user successfully logs in to the system via
the web interface.
State Severity
Warning
TRUE Critical
FALSE Clear
TRUE Critical
FALSE Clear
Warning
TRUE Major
FALSE Clear
Information
Information
TRUE Warning
FALSE Clear
Warning
Information
Warning
Information