Table of Contents
Advertisement
Viewing Call Information
V
C
IEWING
ALL
I
NFORMATION
148
SCOPIA 400/1000 Gateway User Guide
4
Select the Same as Port check box if you want to duplicate settings
from another Gateway port that you choose from the field. When
selected, you cannot modify any settings in this section.
This option is unavailable in Gateways that support only one PRI port.
Note
5
To enable or disable a service for this port, select it and click Enable or
Disable.
The Calls tab displays a list of the calls currently defined in the Gateway and the
basic details of each call. The Calls tab displays the following information in
table format:
Call ID—Displays the call identifier.
Source Party Number—Displays the alias that identifies the source
endpoint of the call.
Destination Party Number—Displays the alias that identifies the
destination endpoint of the call.
Start Time—Displays the time at which the call began.
Total Call Bandwidth—Displays the total bandwidth (in Kbps) used for
this call on both sides.
Encryption—Indicates the level of encryption currently in use for the
specified call leg.
Total—Field indicates the total number of calls currently defined in the
Gateway.
The following topics discuss the tasks you can perform in this tab:
Refreshing Call Information
Viewing Call Details
Disconnecting Calls
on page 149
on page 149
on page 152
Advertisement
Table of Contents
