About Gateway Services
D
G
ELETING
ATEWAY
S
ERVICES
126
SCOPIA 400/1000 Gateway User Guide
3
In the Bonding Synchronization field, choose a bonding
synchronization setting.
Choose Prolong only for endpoints that use non-standard synchronization
Note
mechanisms.
Click OK to save your setting and close the Advanced dialog box.
4
Click the Port Specific tab.
5
In the Enable service in ports section, select the PRI ports that are
6
enabled for this service.
7
Click OK.
The Gateway interface uploads your settings to the services database.
In the Settings tab, you can delete existing services.
Procedure
In the Gateway interface, on the sidebar, click Gateway (if not already
1
selected).
Click the Services tab.
2
Select a service and click Delete.
3