Downgrading your SCOPIA TIP Gateway
If necessary, you can downgrade your network device in one of the following ways:
Changing the IP Address of your Gateway
You may need to change the IP address of your gateway when it is transferred to a different
subnet of your network.
Perform the procedure described in
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
•
To downgrade one version back after you upgraded your network device, perform the
procedure in
"Restoring the Previous Software Version of a Network Device" on page
•
To downgrade to a version earlier than the previous version, see
File of a Video Device" on page
67.
"Setting the IP Address of the Device" on page
69.
"Upgrading the Software
20.
Performing Maintenance Procedures | 71