Table of Contents
Advertisement
3-74
Service Level Troubleshooting
Save Parameters
This function allows to save the selected communication settings or return to the
communication settings to select additional options.
Press the Paper Feed button for the option you want.
Emulation/Software Options
Receipt Synchronization
This function makes it possible for the user to select whether to enable or to disable
receipt synchronization printing.
When "Receipt synchronization" is enabled (Mode1 or Mode2), printer returns the status
for buffered status command after confirming the start of printing.
The following commands are the buffered status command.
1B 75 0 Transmit Peripheral Device Status
1B 76 Transmit Printer Status
1D 49 n Transmit Printer ID
1D 72 n Transmit Status
Regarding Mode1 and Mode2, the command/status sequence is completely the same.
The only difference is the printing speed. The printing speed of Mode1 is the same as in
normal printing (max. 12ips).
Whereas, the printing speed of Mode2 is 4ips (max) in order to prevent the clatter print
in the synchronized line mode.
When Mode3 is selected, the following command will be available.
1F 0A n Get Print Completion
When "Receipt synchronization" is disabled, printer returns the status for buffered
status command immediately after decoding the status command.
Caution: Be extremely careful in changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of the printer.
Advertisement
Table of Contents
Troubleshooting
