Emulation/Software Options - NCR 7197 II SERIES Owner's Manual

7197 Series II Service Manual
2. Push Paper Feed Button and the receipt station will print all code pages.
3. The test ends with a cut.
4. Go to step 2 again to repeat this test.
To exit the Receipt Test Mode:
1. Enter the Configuration Menu again.
2. Disable the Receipt Test Mode
3. Exit the Configuration Menu
The printer is in Normal Mode and can communicate with the host computer.
Save Parameters
This function allows to save the selected communication settings or return to the
communication settings to select additional options.
Press the Paper Feed Button for the option you want.
Save new parameters ?
YES
NO, MODIFY

Emulation/Software Options

Printer Emulation
Printer emulation determine the commands that are available to the printer. They are set
by using the Configuration Menu. (See "Configuring the Printer," for instructions on how
to enter the Configuration Menu.). The available options are:



Press the Paper Feed Button for the emulation you want.
** SET EMULATION ?
YES
NO
7194 Mode*
7193 Mode
7197 Series II Native Mode
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
42
-> Long Click
-> Short Click
7194 Mode
7193 Mode
7197 Series II Native Mode
-> Long Click
-> Short Click
-> 1 Click
-> 2 Clicks
-> 3 Clicks
June 2011
Chapter 3: Diagnostics