Print Characteristics Commands; Station Select Commands - NCR 7156 Service Manual

Appendix B: Communication Information
Printer Function Commands
Hexadecimal Code

Print Characteristics Commands

These commands control what the printed information looks like and are listed in
numerical order of their hexadecimaladecimal codes.
Print Characteristics Commands
Hexadecimal Code
12
13
1B 12
1B 16 n
1B 21 m
1B 25 n
1B 26 etc.
1B 3A 0 0 0
1B 47
1B 48
1B 52 n
1B 74 n
1B 56 n
1B 7B n

Station Select Commands

These commands control which station incoming data is printed on.
Station Select Commands
Hexadecimal Code
1B 63 30 n
1B 63 31 n
1C
1E
176
Command
Receipt Station commands in chapter 6 of the Owner's Guide.
Command
Double-Wide Characters
Single-Wide Characters
Rotated Print
Select Pitch (Column Width)
Set Print Mode
Select Character Set
Define User-Defined Character Set (Receipt & Slip Stations)
Copy Character Set From ROM to RAM
Enable Double Strike (Slip Station)
Disable Double Strike (Slip Station)
Select Character Code Table
Set or Cancel Rotated Print
Set or Cancel Upside-Down Print
Command
Select Receipt or Slip for Printing, Slip for MICR Read
Select Receipt or Slip for Setting Line Spacing
Select Slip Station
Select Receipt Station (if 1C used to select slip station)
This command can also be interpreted as Journal Tab
(ignored if 1B 63 used to select station)
For more information, see the descriptions for the Journal Tab
and the Select Receipt Station commands in chapter 6 of the
Owner's Guide.
September 1998
7156 Service Guide