Removal And Reinstallation Of The Cover; Front Cover - Mitsubishi Electric FR-D720-0.2K-G Instruction Manual

Removal and reinstallation of the cover

1.3

Removal and reinstallation of the cover

1.3.1

Front cover

Removal (Example of FR-D720-1.5K-G)
1) Loosen the mounting screws of the front cover. (The screws cannot be removed.)
2) Remove the front cover by pulling it like the direction of arrow.
1)
Reinstallation (Example of FR-D720-1.5K-G)
1) Place the front cover in front of the drive unit, and install it straight.
2) Tighten the mounting screws on the front cover.
1)
NOTE
 Fully make sure that the front cover has been reinstalled securely.
 The same serial number is printed on the capacity plate of the front cover and the rating plate of the drive unit. Since
these plates have the same serial numbers, always reinstall the removed cover onto the original drive unit.
6
Mounting screw
Mounting screw
2)
2)