xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
Multicast VLAN Commands
The Multicast VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create igmp_snooping multicast_vlan
config igmp_snooping multicast_vlan
show igmp_snooping
multicast_vlan_group
delete igmp_snooping multicast_vlan
enable igmp_snooping multicast_vlan
disable igmp_snooping multicast_vlan
show igmp_snooping multicast_vlan
config igmp_snooping multicast_vlan
forward_unmatched
create igmp_snooping
multicast_vlan_group_profile
config igmp_snooping
multicast_vlan_group_profile
delete igmp_snooping
multicast_vlan_group_profile
show igmp_snooping
multicast_vlan_group_profile
config igmp_snooping
multicast_vlan_group
show igmp_snooping
multicast_vlan_group
create mld_snooping multicast_vlan
config mld_snooping multicast_vlan
create mld_snooping
multicast_vlan_group_profile
config mld_snooping
multicast_vlan_group_profile
delete mld_snooping
multicast_vlan_group_profile
show mld_snooping
multicast_vlan_group_profile
config mld_snooping
multicast_vlan_group
Parameters
<vlan_name 32> <vlanid 2-4094> {remap_priority [<value 0-7> | none] {
replace_priority}}
<vlan_name 32> {[add | delete] [member_port <portlist> | [source_port
<portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] |
state [enable | disable] | replace_source_ip <ipaddr> | remap_priority
[<value 0-7> | none] { replace_priority}}(1)
{< vlan_name 32> }
<vlan_name 32>
{<vlan_name 32>}
[disable | enable]
<profile_name 1-32>
<profile_name 1-32> [add | delete] <mcast_address_list>
[profile_name <profile_name 1-32> | all]
{<profile_name 1-32>}
<vlan_name 32> [add | delete] profile_name <profile_name 1-32>
{< vlan_name 32> }
config <vlan_name 32> <vlanid 2-4094> {remap_priority [<value 0-7> |
none] {replace_priority}}
<vlan_name 32> {[add | delete] [member_port <portlist> | [source_port
<portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] |
state [enable | disable] | replace_source_ip <ipv6addr> | remap_priority
[<value 0-7> | none] { replace_priority}}(1)
<profile_name 1-32>
<profile_name 1-32> [add | delete] <mcastv6_address_list>
[profile_name <profile_name 1-32> | all]
{<profile_name 1-32>}
<vlan_name 32> [add | delete] profile_name <profile_name 1-32>
183