D-Link xStack DES-3528 Series Cli Reference Manual page 468

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
Remote Loopback
Unidirection
Link Monitoring
Variable Request
PDU Revision
Operation Status
Loopback Status
There is no peer entry information exist.
Port 2
Local Client
-----------------------------------------------------------
OAM
Mode
Max OAMPDU
CTRL+C ESC q Quit
show ethernet_oam ports configuration
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show Ethernet OAM configuration on port 1-2:
DES-3528:admin# show ethernet_oam ports 1-2 configuration
Command: show ethernet_oam ports 1-2 configuration
Port 1
-----------------------------------------------------------
OAM
Mode
Dying Gasp
Critical Event
Remote Loopback OAMPDU
Symbol Error
Notify State
Window:
Threshold
Frame Error
Notify State
Window:
Threshold
Frame Period Error
Notify State
Window:
Threshold
CTRL+C ESC q Quit
: Supported
: Supported
: Supported
: Not Supported
: 0
: Disable
: No Loopback
: Disabled
: Active
: 1518 Bytes
SPACE n Next Page
Used to display Ethernet OAM configuration.
show ethernet_oam ports {<portlist>} configuration
This command is used to show port's Ethernet OAM configurations.
portlist – Specifies a range of ports to display.
Only Administrator and Operator-level users can issue this command.
: Enabled
: Passive
: Enabled
: Enabled
: Processed
: Enabled
: 1000 milliseconds
: 2 Errored Symbol
: Enabled
: 1000 milliseconds
: 2 Errored Frame
: Enabled
: 1000000 Frames
: 10 Errored Frame
SPACE n Next Page
ENTER Next Entry a
ENTER Next Entry a
468
All
All