D-Link xStack DES-3528 Series Cli Reference Manual page 45

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
Command
create trusted_host
config trusted_host
delete trusted_host
show trusted_host
enable snmp traps
enable snmp authenticate_traps
show snmp traps
disable snmp traps
disable snmp authenticate_traps
config snmp system_contact
config snmp system_location
config snmp system_name
enable snmp
disable snmp
Each command is listed, in detail, in the following sections.
Parameters
[<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] {snmp | telnet | ssh | http | https | ping}
[<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] [add | delete] {snmp | telnet | ssh | http | https | ping | all}
[ipaddr <ipaddr> | ipv6address <ipv6addr> | network <network_address> |
ipv6_prefix <ipv6networkaddr> | all]
{linkchange_traps {ports <portlist>}}
<sw_contact>
<sw_location>
<sw_name>
45