D-Link xStack DES-3528 Series Cli Reference Manual page 553

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
enable l2protocol_tunnel
Purpose Used to enable the Layer 2 protocol tunneling function.
Syntax enable l2protocol_tunnel
Description
Used to enable the Layer 2 protocol tunneling function.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the Layer 2 protocol tunneling function:
DES-3528:admin#
Command: enable l2protocol_tunnel
Success.
DES-3528:admin#
disable l2protocol_tunnel
Purpose
Used to disable the Layer 2 protocol tunneling function.
Syntax disable l2protocol_tunnel
Description Used to disable the Layer 2 protocol tunneling function.
Parameters
None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the Layer 2 protocol tunneling function:
DES-3528:admin#
Command: disable l2protocol_tunnel
Success.
DES-3528:admin#
enable l2protocol_tunnel
disable l2protocol_tunnel
553