D-Link xStack DES-3528 Series Cli Reference Manual page 191

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show igmp_snooping multicast_vlan_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the multicast group profiles configured for an IGMP multicast VLAN.
DES-3528:admin# show igmp_snooping multicast_vlan_group
Command: show igmp_snooping multicast_vlan_group
VLAN Name
-------------------------------
mv1
DES-3528:admin#
create mld_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create MLD multicast VLAN mv1:
DES-3528:admin# create mld_snooping multicast_vlan mv1 2
Command: create mld_snooping multicast_vlan mv1 2
Success.
DES-3528:admin#
Used to display the multicast group profiles configured for the specified IGMP multicast
VLAN.
show igmp_snooping multicast_vlan_group {< vlan_name 32> }
This command is used to display the multicast group profiles configured for the specified
IGMP multicast VLAN.
vlan_name – The name of the multicast VLAN to be configured, each multicast VLAN is
given a name that can be up to 32 characters. If not specified, all Ipv4 multicast VLAN
groups will be displayed.
None.
VLAN ID
-------
2
Used to create an MLD multicast VLAN
create mld_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094>
This command will create a MLD multicast_vlan. Multiple multicast VLANs can be
configured.
When creating MLD multicast VLAN, it cannot duplicate with the VLAN entries in the existing
802.1Q VLAN database. The MLD Multicast VLAN snooping function co-exists with the 1Q
VLAN snooping function.
<vlan_name> − The name of the VLAN to be created. Each multicast VLAN is given a name
that can be up to 32 characters.
vlanid – The VLAN ID of the multicast VLAN to be create. The range is 2-4094.
Only Administrator and Operator and Power-User-level users can issue this command.
Multicast Group Profiles
--------------------------
g1
191