D-Link xStack DES-3528 Series Cli Reference Manual page 368

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
upload sim_ms
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To upload configuration files to a TFTP server:
DES-3528:admin# upload sim_ms configuration_to_tftp 10.55.47.1 configuration.txt
Command: upload sim_ms configuration_to_tftp 10.55.47.1 configuration.txt
This device is uploading configuration.
Upload Status :
ID MAC Address
--- ----------------- ----------------
1 00-00-35-28-01-00 Success
DES-3528:admin#
User to upload a configuration file to a TFTP server from a specified member of a SIM group.
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename> {[
members <mslist> | all]}
This command will upload a configuration file to a TFTP server from a specified member of a
SIM group.
configuration_from_tftp − Specify this parameter to upload a Switch configuration to
members of a SIM group.
log_to_ftp – Specify this parameter to upload a Switch log to a member of the SIM group.
<ipaddr> − Enter the IP address of the TFTP server to which to upload a configuration file.
<path_filename> – Enter a user-defined path and file name on the TFTP server so as to
upload configuration files.
members – Enter this parameter to specify the members to which the user prefers to upload
the Switch configuration or log files. The user may specify a member or members by adding
one of the following:
<mslist> − Enter a value, or values to specify which members of the SIM group will

upload the Switch configuration or log.
all – Add this parameter to specify all members of the SIM group will upload the Switch
configuration or log.
Only Administrator and Operator and Power-User-level users can issue this command.
Result
Please wait several minutes ...
368