D-Link xStack DES-3528 Series Cli Reference Manual page 30

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show greeting_message
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the currently configured greeting message:
DES-3528:admin#show greeting_message
Command: show greeting_message
================================================================================
Copyright(C) 2013 D-Link Corporation. All rights reserved.
================================================================================
DES-3528:admin#
Used to view the currently configured greeting message configured on the Switch.
show greeting_message
This command is used to view the currently configured greeting message on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
DES-3528 Fast Ethernet Switch
Command Line Interface
Firmware: Build 3.00.012
30