D-Link xStack DES-3528 Series Cli Reference Manual page 502

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
cfm lock md
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To start management lock:
DES-3528:admin# cfm lock md op-domain ma op-ma mepid 1 remote_mepid 2 action start
Command: cfm lock md op-domain ma op-ma mepid 1 remote_mepid 2 action start
Success.
DES-3528:admin#
This command is used to start/stop cfm management lock. This command will result in the
MEP sends a LCK PDU to client level MEP.
cfm lock md <string 22> ma <string 22> mepid <int 1-8191> remote_mepid <int 1-
8191> action [start | stop]
This command is used to start/stop cfm management lock. This command will result in the
MEP sends a LCK PDU to client level MEP.
md - Specifies the maintenance domain name.
<string 22> - Enter the maintenance domain name here. This name can be up to 22
characters long.
ma - Specifies the maintenance association name.
<string 22> - Enter the maintenance association name here. This name can be up to 22
characters long.
mepid - The MEP ID in the MD which sends LCK frame.
<int 1-8191> - Enter the MEP ID value here. This value must be between 1 and 8191.
remote_mepid - The peer MEP is the target of management action.
<int 1-8191> - Enter the remote MEP ID used here. This value must be between 1 and 8191.
action - Specifies to start or to stop the management lock function.
start - Specifies to start the management lock function.
stop - Specifies to stop the management lock function.
Only Administrator and Operator and Power-User-level users can issue this command.
502