D-Link xStack DES-3528 Series Cli Reference Manual page 76

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's history log:
DES-3528:admin# show log index 1-5
Command: show log index 1-5
Index Time
----- -------------------
5 00000 days 00:01:09
4 00000 days 00:00:14
3 00000 days 00:00:06
2 00000 days 00:00:01
1 00000 days 00:06:31
DES-3528:admin#
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Used to display the Switch's history log.
show log {[index <value_list> | severity {module <module_list>} {emergency | alert |
critical | error | warning | notice | informational | debug | <level_list 0-7>} | module
<module_list>]}
This command will display the contents of the Switch's history log.
−
index <value_list> This parameter specifies the range of log index to show. For example,
show log index 1-5 will display the history log from 1 to 5.
severity - Specifies the severity level indicator.
module - Specifies the module list used.
<module_list> - Enter the module list used here.
emergency - Specifies that the severity will be set to emergency.
alert - Specifies that the severity will be set to alert.
critical - Specifies that the severity will be set to critical.
error - Specifies that the severity will be set to error.
warning - Specifies that the severity will be set to warning.
notice - Specifies that the severity will be set to notice.
informational - Specifies that the severity will be set to informational.
debug - Specifies that the severity will be set to debug.
<level_list 0-7> - Enter the level list value here. This value must be between 0 and 7.
module - Specifies the module list used.
<module_list> - Enter the module list used here.
None.
Log Text
----------------------------------
Successful login through Console (Username: Anonymous)
System started up
Port 1 link up, 100Mbps FULL duplex
Spanning Tree Protocol is disabled
Configuration saved to flash (Username: Anonymous)
NOTE: For detailed information regarding Log entries that will appear in this window,
please refer to Appendix C at the back of the xStack DES-3528 Layer 2 Stackable
Fast Ethernet Managed Switch User Manual.
Used to enable the syslog sending messages.
enable syslog
This command enables the system log to be sent to a remote host.
None.
Only Administrator and Operator-level users can issue this command.
76