D-Link xStack DES-3528 Series Cli Reference Manual page 450

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
config pppoe circuit_id_insertion ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable port 5 PPPoE circuit ID insertion function:
DES-3528:admin#config pppoe circuit_id_insertion ports 5 state enable
Command: config pppoe circuit_id_insertion ports 1:5 state enable
Success.
DES-3528:admin#
show pppoe circuit_id_insertion ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display port 2-5 PPPoE circuit ID insertion configuration:
DES-3528:admin#show pppoe circuit_id_insertion ports 1:2-1:5
Command: show pppoe circuit_id_insertion ports 1:2-1:5
Port State Circuit ID
---- -------- ---------------------------------------------
1:2 Disabled Switch IP
1:3 Disabled Switch IP
1:4 Disabled Switch IP
1:5 Enabled Switch IP
DES-3528:admin#
This command is used to configure port's PPPoE Circuit ID insertion function.
config pppoe circuit_id_insertion ports <portlist> {state [enable | disable] | circuit_id
[mac | ip | udf <string 32>]}
When the port's state and the global state are enabled, the system will insert the Circuit ID
TAG to the received PPPoE discovery initiation and request packet if the TAG is absent, and
remove the Circuit ID TAG from the received PPPoE offer and session confirmation packet.
<portlist> - Specify a list of ports to be configured.
state - Specify to enable or disable port's PPPoE circuit ID insertion function. The default
setting is enable.
enable - Enable port's PPPoE circuit ID insertion function.
disable - Disable port's PPPoE circuit ID insertion function.
circuit_id - Configure the device ID part for encoding of the circuit ID option.
mac - The MAC address of the Switch will be used to encode the circuit ID option.
ip - The Switch's IP address will be used to encode the circuit ID option. This is the default.
udf - A user specified string to be used to encode the circuit ID option.
<string 32> - Enter a string with the maximum length of 32.
Only Administrator-level users can issue this command.
This command is used to display Switch's port PPPoE Circuit ID insertion configuration.
show pppoe circuit_id_insertion ports {<portlist>}
This command is used to display Switch's port PPPoE Circuit ID insertion configuration.
<portlist> - (Optional) Specify a list of ports to be displayed.
None.
450