Multicast Vlan Replication Commands; Enable Ipmc_Vlan_Replication; Disable Ipmc_Vlan_Replication - D-Link xStack DGS-3400 Cli Manual

xStack
The Multicast VLAN Replication commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command

enable ipmc_vlan_replication

disable ipmc_vlan_replication

config ipmc_vlan_replication
create ipmc_vlan_replication_entry
config ipmc_vlan_replication_entry
source
config ipmc_vlan_replication_entry
destination
delete ipmc_vlan_replication_entry
show ipmc_vlan_replication
show ipmc_vlan_replication_entry
Each command is listed, in detail, in the following sections.
enable ipmc_vlan_replication
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable static IP multicast VLAN replication:
D G S -3 4 26 :5 # e na b le i p m c_ v la n_ r e pl i ca ti o n
C o m ma n d: e n a bl e i pm c _ vl a n_ re p l ic a ti on
S u c ce s s.
D G S -3 4 26 :5 #
disable ipmc_vlan_replication
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
M
ULTICAST
Parameters
{ttl [decrese | no_decrease] | src_mac [replace | no_replace]} (1)
<name 16>
<name 16> [[vlan <vlan_name 32> | vlanid <vlanid 1-4094>] | group [add |
delete] [mcast_ip <mcast_address_list>| mcast_ipv6
<mcastv6_address_list>]{[source_ip<ipaddr>|source_ipv6 <ip6addr>]}]
<name 16> [add | delete] [vlan <vlan_name 32> | vlanid <vidlist>] ports
<portlist>
{<name 16>}
{<name 16>}
Used to enable static IP multicast VLAN replication on the Switch.
enable ipmc_vlan_replication
This command is used to enable static IP multicast VLAN replication on the Switch. The
replication function is enabled by default.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the static IP multicast VLAN replication on the Switch.
disable ipmc_vlan_replication
This command is used to disable the static IP multicast VLAN replication on the switch.
None.
Only Administrator and Operator-level users can issue this command.
VLAN R
EPLICATION
452
61
C
OMMANDS