D-Link xStack DES-3528 Series Cli Reference Manual page 60

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
enable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To turn on SNMP authentication trap support:
DES-3528:admin# enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DES-3528:admin#
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP traps support:
DES-3528:admin#show snmp traps
Command: show snmp traps
SNMP Traps
Authenticate Trap
Linkchange Traps
Coldstart Traps
Warmstart Traps
DES-3528:admin#
disable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To prevent SNMP traps from being sent from the Switch:
DES-3528:admin# disable snmp traps
Command: disable snmp traps
Success.
Used to enable SNMP authentication trap support.
enable snmp authenticate_traps
This command is used to enable SNMP authentication trap support on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to show SNMP traps support on the Switch .
show snmp traps {linkchange_traps {ports <portlist>}}
This command is used to view the SNMP traps support status currently configured on the
Switch.
linkchange_traps – Specifies to display the SNMP Linkchange Traps.
ports – Specifies the list of ports to be displayed.
None.
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
Used to disable SNMP trap support on the Switch.
disable snmp traps
This command is used to disable SNMP trap support on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
60