D-Link xStack DES-3528 Series Cli Reference Manual page 113

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show per_queue bandwidth_control
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display port per CoS bandwidth control table:
DES-3528:admin#show per_queue bandwidth_control 10
Command: show per_queue bandwidth_control 10
Queue Bandwidth Control Table On Port: 10
Queue Min Rate(Kbit/sec)
0 No Limit
1 64
2 No Limit
3 No Limit
4 No Limit
5 No Limit
6 No Limit
DES-3528:admin#
Used to display the per port per CoS queue bandwidth control setting.
show per_queue bandwidth_control {<portlist>}
This command is used to display the per port per CoS queue bandwidth control setting.
<portlist> − Specifies a port or range of ports to be viewed.
None.
Max Rate(Kbit/sec)
No Limit
192
No Limit
No Limit
No Limit
No Limit
No Limit
113