D-Link xStack DES-3528 Series Cli Reference Manual page 589

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
DES-3528:admin#config udp_helper udp_port delete 55
Command: config udp_helper udp_port delete 55
Success.
DES-3528:admin#
enable udp_helper
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the UDP helper function:
DES-3528:admin#enable udp_helper
Command: enable udp_helper
Success.
DES-3528:admin#
disable udp_helper
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the UDP helper function:
DES-3528:admin#disable udp_helper
Command: disable udp_helper
Success.
DES-3528:admin#
show udp_helper
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current UDP Helper configuration:
This command is used to enable the UDP helper function on the Switch.
enable udp_helper
This command is used to enable the UDP helper function on the Switch.
None.
Only Administrator, Operator and Power-User level users can issue this command.
This command is used to disable the UDP helper function on the Switch.
disable udp_helper
This command is used to disable the UDP helper function on the Switch.
None.
Only Administrator, Operator and Power-User level users can issue this command.
This command is used to display the current UDP Helper configuration on the Switch
show udp_helper {[udp_port | ipif <ipif_name 12>]}
This command is used to display the current UDP Helper configuration on the Switch
udp_port - (Optional) Specify the UDP port configured for the UDP helper.
ipif - (Optional)Specify the name of the IP interface to be configured for the UDP helper
<ipif_name 12> - Enter the name of the IP interface.
None.
589