D-Link xStack DES-3528 Series Cli Reference Manual page 477

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
config dhcp pool lease
Purpose
Used to specify the duration of the lease.
Syntax config dhcp pool lease <pool_name 12> [<day 0-365> <hour 0-23><minute 0-59> |
infinite]
Description By default, each IP address assigned by a DHCP server comes with a one-day lease, which
is the amount of time that the address is valid.
Parameters <pool_name 12> – Specifies the name of the pool.
<day 0-365> – Specifies the days of lease.
<hour 0-23> – Specifies the hours of the lease.
<minute 0-59> – Specifies the minutes of the lease
infinite – Specifies that the lease will be infinite.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To configure the lease of a pool:
DES-3528:admin# config dhcp pool lease accounting infinite
Command: config dhcp pool lease accounting infinite
Success.
DES-3528:admin#
config dhcp pool boot_file
Purpose
Used to specify the name of the file that is used as a boot image.
Syntax config dhcp pool boot_file <pool_name 12> {<file_name 64>}
Description The boot file is used to store the boot image for the client. The boot image is generally the
operating system the client uses to load.
If this command is entered twice for the same pool, the second command will overwrite the
first command.
If the boot file is not specified, the boot_file information will not be provided to the client .
Parameters <pool_name 12> – Specifies the name of the pool.
<file_name 64> – Specifies the file name of the boot image.
Restrictions Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To configure the boot file:
DES-3528:admin# config dhcp pool boot_file accounting boot.had
Command: config dhcp pool boot_file accounting boot.had
Success.
DES-3528:admin#
477