D-Link xStack DES-3528 Series Cli Reference Manual page 511

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show autoconfig
Purpose
This command is used to display if the auto-configuration is enabled or disabled.
Syntax show autoconfig
Description This command is used to display if the auto-configuration is enabled or disabled.
Parameters None.
Restrictions None.
Example usage:
To show autoconfig status:
DES-3528:admin#
Command: show autoconfig
Autoconfig State : Disabled
DES-3528:admin#
show autoconfig
511