D-Link xStack DES-3528 Series Cli Reference Manual page 18

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show switch
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's information:
DES-3528:admin# show switch
Command: show switch
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version
Firmware Version
Hardware Version
Serial Number
System Name
System Location
System Uptime
System Contact
Spanning Tree
GVRP
IGMP Snooping
MLD Snooping
VLAN Trunk
Telnet
Web
SNMP
CTRL+C ESC q Quit
show device_status
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's device status:
DES-3528:admin# show device_status
Command: show device_status
Internal Power: Active
External Power: Fail
DES-3528:admin#
Used to display general information about the Switch.
show switch
This command displays information about the Switch.
None.
None.
: DES-3528 Fast Ethernet Switch
: 1C-AF-F7-AD-33-20
: 10.90.90.90 (Manual)
: default
: 255.0.0.0
: 0.0.0.0
: Build 1.00.B008
: Build 3.00.012
: A4
: P1UQ3A4000012
:
:
: 0 days, 0 hours, 3 minutes, 58 seconds
:
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled (TCP 23)
: Enabled (TCP 80)
: Disabled
SPACE n Next Page
Used to display the current Switch's power and fan status.
show device_status
This command displays status of both the Switch's internal and external power and the fan
status.
None.
None.
ENTER Next Entry a
18
All