D-Link xStack DES-3528 Series Cli Reference Manual page 164

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show address_binding ip_mac
Purpose This command is used to display the IP–MAC–Port Binding entries.
Syntax show address_binding ip_mac [all | ipaddress <ipaddr> mac_address <macaddr>] |
ipv6address <ipv6addr> mac_address <macaddr>
Description
This command is used to display the IP–MAC–Port Binding entries.
Parameters ip_mac - Specifies the user created IMPB database.
all –Specifies that all the entries will be displayed.
ipaddress - Specifies the IP address of the entry in the database.
mac_address- Specifies the MAC address of the entry.
ipv6address - Specifies the IPv6 address of the entry in the database.
Restrictions None.
Example usage:
To show IP–MAC–Port Binding entries:
DES-3528:admin#show address_binding ip_mac all
Command: show address_binding ip_mac all
M(Mode) - D:DHCP, N:ND S:Static ST(ACL Status) - A:Active I:Inactive
IP Address
--------------------------------------- ----------------- -- -- ---------------
Total Entries : 0
DES-3528:admin#
show address_binding nd_snoop
Purpose This command is used to display the IP–MAC–Port Binding ND snooping.
Syntax show address_binding nd_snoop {ports <portlist>}
Description This command is used to display the IP–MAC–Port Binding ND snooping.
Parameters ports – Specifies the list of ports used for this display.
Restrictions None.
Example usage:
To display the IP–MAC–Port Binding ND snooping:
DES-3528:admin#show address_binding nd_snoop
Command: show address_binding nd_snoop
ND Snoop
DES-3528:admin#
To display the IP–MAC–Port Binding ND snooping port 1:
DES-3528:admin#show address_binding nd_snoop ports 1
Command: show address_binding nd_snoop ports 1
Port Max Entry
---- ---------
1 No Limit
DES-3528:admin#
: Disabled
MAC Address
164
M ST Ports