D-Link xStack DES-3528 Series Cli Reference Manual page 241

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
Matching Rules:
Client-ID
-----------
00-01-22-33-44-55
Total Entries : 1
DES-3528:admin#
config dhcp_local_relay vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable DHCP local relay for the default VLAN:
DES-3528:admin# config dhcp_local_relay vlan default state enable
Command: config dhcp_local_relay vlan default state enable
Success.
DES-3528:admin#
enable dhcp_local_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the DHCP local relay function:
DES-3528:admin# enable dhcp_local_relay
Command: enable dhcp_local_relay
Success.
DES-3528:admin#
Type
----
MAC Address
Used to enable or disable DHCP local relay function to the vlan.
config dhcp_local_relay vlan <vlan_name 32> state [enable | disable]
This command is used to enable or disable the DHCP local relay function for a specified
vlan. DHCP option 82 will also be automatically added.
<vlan_name 32> – The name of the VLAN to be enabled by DHCP local relay.
State – Enable or disable the DHCP local relay for a specified VLAN.
Only Administrator and Operator and Power-User-level users can issue this command.
Used to enable the DHCP local relay function on the Switch.
enable dhcp_local_relay
This command is used to enable the DHCP local relay function on the Switch.
None.
Only Administrator and Operator and Power-User-level users can issue this command.
Relay Rule
---------
Drop
241