D-Link xStack DES-3528 Series Cli Reference Manual page 353

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
config ssh algorithm
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To configure SSH algorithm:
DES-3528:admin# config ssh algorithm blowfish enable
Command: config ssh algorithm blowfish enable
Success.
DES-3528:admin#
show ssh algorithm
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display SSH algorithms currently set on the Switch:
DES-3528:admin# show ssh algorithm
Command: show ssh algorithm
Encryption Algorithm
--------------------------
3DES : Enabled
AES128 : Enabled
Used to configure the SSH algorithm.
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour | blowfish | cast128 |
twofish128 | twofish192 | twofish256 | MD5 | SHA1 | RSA | DSA] [enable | disable]
This command allows users to configure the desired type of SSH algorithm used for
authentication encryption.
3DES – This parameter will enable or disable the Triple_Data Encryption Standard
encryption algorithm.
AES128 − This parameter will enable or disable the Advanced Encryption Standard AES128
encryption algorithm.
AES192 − This parameter will enable or disable the Advanced Encryption Standard AES192
encryption algorithm.
AES256 − This parameter will enable or disable the Advanced Encryption Standard AES256
encryption algorithm.
arcfour − This parameter will enable or disable the Arcfour encryption algorithm.
blowfish − This parameter will enable or disable the Blowfish encryption algorithm.
cast128 − This parameter will enable or disable the Cast128 encryption algorithm.
twofish128 − This parameter will enable or disable the twofish128 encryption algorithm.
twofish192 − This parameter will enable or disable the twofish192 encryption algorithm.
MD5 − This parameter will enable or disable the MD5 Message Digest encryption algorithm.
SHA1 − This parameter will enable or disable the Secure Hash Algorithm encryption.
RSA − This parameter will enable or disable the RSA encryption algorithm.
DSA − This parameter will enable or disable the Digital Signature Algorithm encryption.
[enable | disable] – This allows the user to enable or disable algorithms entered in this
command, on the Switch.
Only Administrator and Operator and Power-User-level users can issue this command.
Used to display the SSH algorithm setting.
show ssh algorithm
This command will display the current SSH algorithm setting status.
None.
None.
353