D-Link xStack DES-3528 Series Cli Reference Manual page 129

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
disable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the GARP VLAN Registration Protocol (GVRP):
DES-3528:admin# disable gvrp
Command: disable gvrp
Success.
DES-3528:admin#
show vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
DES-3528:admin# show vlan
Command: show vlan
VLAN Trunk State
VLAN Trunk Member Ports
VID : 1
VLAN Type : Static
Member Ports : 1-28
Static Ports : 1-28
Current Tagged Ports
Current Untagged Ports: 1-28
Static Tagged Ports
Static Untagged Ports : 1-28
Forbidden Ports
VID : 100
VLAN Type : Dynamic
Member Ports : 8
Static Ports :
Current Tagged Ports
Current Untagged Ports:
Static Tagged Ports
Used to disable the GARP VLAN Registration Protocol (GVRP).
disable gvrp
This command, along with enable gvrp, is used to enable and disable GVRP on the Switch,
without changing the GVRP configuration on the Switch.
None.
Only Administrator and Operator and Power-User-level users can issue this command.
Used to display the current VLAN configuration on the Switch.
show vlan { [<vlan_name 32> | vlanid < vidlist > | ports {<portlist>}]}
This command displays summary information about each VLAN including the VLAN ID,
VLAN name, the Tagging/Untagging status, and the Member/Non-member/Forbidden status
of each port that is a member of the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which to display a summary of settings.
<vidlist> − Specifies a list of VLANs by VLAN ID.
<portlist> - Specifies the port to be displayed.
None.
:Enabled
:1-5
VLAN Name
Advertisement
:
:
:
VLAN Name
Advertisement
: 8
:
: default
: Enabled
:
: Enabled
129