D-Link xStack DES-3528 Series Cli Reference Manual page 217

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
config mld_snooping querier
Restrictions
Example usage:
To configure the MLD snooping querier:
DES-3528:admin# config mld_snooping querier vlan_name default query_interval 125 state
enable
Command: config mld_snooping querier vlan_name default query_interval 125 state enable
Success.
DES-3528:admin#
config mld_snooping router_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set up static router ports:
DES-3528:admin# config mld_snooping mrouter_ports vlan default add 2:1-2:10
Command: config mld_snooping mrouter_ports vlan default add 2:1-2:10
Success.
DES-3528:admin#
<value 1-2> - Enter the version number value here. This value must be between 1 and 2.
Only Administrator and Operator and Power-User-level users can issue this command.
This command allows you to designate a range of ports as being connected to multicast-
enabled routers.
config mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list>] [add |
delete] <portlist>
This will ensure that all packets with such a router as its destination will reach the multicast-
enabled router, regardless of protocol, etc.
vlan - Specify the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID list here.
add - Specify to add the router ports.
delete - Specify to delete the router ports.
<portlist> - Specify a range of ports to be configured. (UnitID:port number)
Only Administrator and Operator and Power-User-level users can issue this command.
217